CHLORIDE TEST KIT 

The TQC Bresle Kit - Chloride Salt Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity gauge.

The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating.

Inside the TQC Bresle Kit - Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Contamination of blast-media

The TQC Bresle Kit - Chloride Test Kit is also suitable to determine the contamination of blast-media in use. This important test described in the ISO 11127-6 and ISO 11127-7 standards helps to prevent that the dissolved salts in the recycled abrasive media or water will not re-contaminate the surface being cleaned.

ORDERING INFORMATION

Art. No. SP7310

TQC Bresle KIT- Chloride Test KIT
Supplied with: digital conductivity meter, 25x Bresle patch, 6x 25ml beaker, 200ml distilled water, 20ml syringe with needle, calibration and rinse solution, magnetic bresle test spot marker.

.bresle-chloride-test
.tqc-bresle-kit-chloride-test-kit-sp7310
.bresle-salt-kit-test
.contamination-bresle-test-patches